2019 John Deere 4066R

2019 JOHN DEERE 4066R CUT TRACTOR; EHYDRO TRANSMISSION; DELUXE CAB W/ DELUXE AIR RIDE SEAT; FACTORY INSTALLED RADIO; LESS LOADER; CAT1 IMATCH 3-POINT W/ QUICK HITCH; LESS WHEEL SPACER; 16.90-24 6-PLY R4 INDUSTRIAL REAR SINGLES; 10-16.5 6-PLY R4 INDUSTRIAL FRONT SINGLES. For more information contact Nick Chenoweth with American Implement at 620/492/6836 or nchenoweth@americanimplement.com 620/351/1951
MoreLess
Limited Time Offer!

Selling Price -$43,000.00

No Description is Available for this Unit
  • 2019
  • John Deere
  • 4066R
  • Base
  • Compact
  • Yanmar 4TNV86CHT-MJT
  • Diesel
  • 2600 rpm
  • 48.5 kW (65.9 hp)
  • Cylinders: 4 / 2.091 L (4 / 127.6 cu in.)
  • High pressure common rail direct injection
  • Turbocharged and charge air cooled
  • 86 mm (3.4 in.)
  • 90 mm (3.54 in.)
  • 19.1:1
  • Pressurized
  • Liquid
  • Dual element with electronic restriction indicator
  • at rated speed: 178 Nm (131.3 lb-ft)
  • Planetary
  • High pressure common rail direct injection
  • 40.2 kW (54 hp)
  • 38.7 kW (52 hp)
  • Rear - 540 rpm at 2600 rpm
  • Standard transmission; forward/reverse: 12/12 PowrReverser transmission (PRT) | Optional transmission; forward/reverse: 3/3 Hydrostatic transmission (HST)
  • Hydrostatic power
  • Open center
  • Pump rated output: Steering 21.5 L/min (5.7 gpm) | Implement: 38.7 L/min (10.2 gpm), 60.2 L/min (15.9 gpm)
  • Dual gear
  • 770 CCA
  • 12-V: 75 amp
  • size: 2 kW 2.68 hp
  • Farm - 8-16 | Turf - 27x10.5-15 | R4 - 10-16.5
  • Farm - 14.9-24 | Turf - 44x18-20 or 22.5LL-16.1 | R4 - 17.5Lx24
  • 1600 kg (3528 lb)
  • 2400 kg (5292 lb)
  • Clutch disk diameter wet clutch: 129 mm (5.08 in.) | Front axle clearance: 39.5 cm (15.6 in.) | Turning radius with brakes: 2.8 m (9.19 ft) | Turning radius without brakes: 3.0 m (9.84 ft) | Front tread range: 148.1 cm (58.3 in.) | Rear tread spacing: 137.2 cm (54 in.)
  • 185.5 cm (73 in.)
  • Rollover protective structure (ROPS): 49.2 L (13 U.S. gal.) | Cab: 52.2 L (13.8 U.S. gal.)
  • 3-Point category 1 | 24-in. behind link arms: 1135 kg (2500 lb)
  • Crankcase with filter: 5.3 L (1.4 qt)
  • 44 L (12 gal.)
  • Approximate shipping (open-station; cab):OOS - 1710 kg (3770 lb) | Cab - 2120 kg (4675 lb)
  • Emissions compliance: Final Tier 4 | Number of cylinders: four | Cylinder liners: Cast-in-block | Left-hand reverser |Brakes: Multi-plate wet disc | Clutch, wet/dr: Wet | Differential lock | Draft control sensing: Position control | PTO Control: Independent | PTO Clutch: Wet disk | Rollover protective structure: Type Foldable | Platform - flat/straddle: flat | Gear shift location - console/floor: Left-hand Side | Cab Compliance: OSHA, SAE, ASAE | Cab Visibility: 360 degree (angle) | Cab Doors: One | Noise rating: 78 dBA | Seat equipment: Air
  • temperature differential: 16.7 °C (30 °F)
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $43,000.00
  • JOHNSON
  • Pre-Owned
  • 115135
  • 2019
  • John Deere
  • 4066R
  • 1LV4066RTKK405993
  • 61
  • Standard transmission; forward/reverse: 12/12 PowrReverser transmission (PRT) | Optional transmission; forward/reverse: 3/3 Hydrostatic transmission (HST)
  • High pressure common rail direct injection
  • Available
Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.