2024 John Deere High Crop Clearance Specialty 6120EH
Information
2024 John Deere High Crop Clearance Specialty 6120EH
- High-crop axle maximum clearance 33 in.
- Creeper transmission minimum .14 mph at rated engine speed
- Open operating station and premium cab
Features may include:
Tire combinations; two-wheel drive (2WD), mechanical front-wheel drive (MFWD) and rear axle – radial tiresOverview
Front and rear radial tire offerings are available on all models, except for the front tires on the open-operator station (OOS) configurations.
Benefits- Better ride quality
- Better wear characteristics
- Less compaction
- More efficient converting more power to the ground
- Heavy-duty front rims are also available that are capable of additional load and are perfect for roadside mowing or sidehill applications
All John Deere 6E Series Tractors feature the reliable and proven 4.5L (275-cu in.) engines. These engines deliver constant power over a wide range of rpm with a power bulge above rated power and excellent torque characteristics.
The 6E Series, while being value-featured and competitively priced, are built with John Deere's long-standing reputation for reliability, durability, and maintainability.
12 forward/12 reverse (12F/12R), 12F/12R with creeper, and 24F/12R PowrReverser™ transmissionsOverview
The 6E Series PowrReverser transmissions deliver unmatched performance. This transmission is ideal for working in tight areas where forward to reverse shifting is a primary occurrence such as in barns, feedlots, and loader applications.
Producers who operate power take-off (PTO) implements like a rotary cutter or baler will appreciate the additional working speeds with the 24F/12R PowrReverser transmission. High and low buttons are used to make fine adjustments in speed without needing to use the clutch, delivering improved productivity.
The PowrReverser transmission provides 12 forward and 12 reverse speeds. Six well-spaced ground speeds place the operator in the important haying or rotary cutter range of 8 km/h to 20.9 km/h (5 mph to 13 mph). With this transmission, the operator can reach a top speed of 31.5 km/h (19.6 mph).
Operator controlsTwo levers, one for speed and one for range, with the addition of an electrohydraulic left-hand reverser, provide operators optimum control and maneuverability.
- Range lever (right-hand side [cab], left-hand side [OOS]) selects four ranges (A, B, C, D).
- Gear selection (right-hand side) selects speeds (1, 2, or 3) in the forward or reverse
- Electrohydraulic left-hand reverser allows for quick and convenient shuttle shifting between forward and reverse at any
- High and low buttons are located on the gear shifter for the 24F/12R PowrReverser
- 12F/12R creeper transmission speed control (left-hand side)
All speed gears (1, 2, 3) are fully synchronized for shifting-on-the-go capabilities, putting less wear on the operator and saving time in the field. In the 12F/12R PowrReverser transmission, gears are synchronized for low shifting effort while the operator is doing field or loader work and during transport.
Highlights
- ,
- 2024
- John Deere
- High Crop Clearance Specialty 6120EH
- Model: 4045HLV82 | family: NJDXL04.5317
- PowrReverser™ 16F/16R with creeper | Reverser: Left hand, electrohydraulic | Creeper: PowrReverser™ 16F/16R with creeper
- Available
Specifications
- 2024
- John Deere
- High Crop Clearance Specialty
- 6120EH
- Row Crop
- Model: 4045HLV82 | family: NJDXL04.5317
- John Deere
- PowerTech™ 4045 EWL
- 4 | Wet sleeved
- 276 cu in. (4.5 L)
- Rated - At 2200 rpm: 120 hp (88 kW) | Maximum: 108.0 hp (80.6 kW) | Power boost: At 1900 rpm: 4 percent
- 2200 rpm | (at rated PTO speeds: 540 at 2100 rpm / 540E at 1645 rpm / 1000 at 2100 rpm
- Turbocharged/Air-to-Air Aftercooled
- Level: Final Tier 4 | After treatment type: DOC/SCR
- Peak At 1600 rpm: 322 lb-ft (437 Nm)
- Rated - At 2100 rpm: 90 hp (66.2 kW) | Rear power take-off: 540 at 2100 rpm / 540E at 1645 rpm / 1000 at 2100 rpm
- torque rise: At 1600 rpm: 30 percent | Rear power take-off: Independent | Rear power take-off: 540/540 Economy (6 spline) | actuation: Electrohydraulic
- PowrReverser™ 16F/16R with creeper | Reverser: Left hand, electrohydraulic | Creeper: PowrReverser™ 16F/16R with creeper
- wet/dry: Wet
- Rear axle: High-Crop Flange Drop Axle | Front axle: Mechanical Front Wheel Drive (MFWD)
- Inboard planetary
- Rear axle - controls: Electrohydraulic
- and control: Hydraulic wet disc
- MFWD: 230/95R48 R1W Radial
- 12 V
- size - OOS: 90 amp / Cab: 120 amp
- 78 dBA
- rated output: 24.7 gpm (94 L/min)
- Open Center | Number of rear selective control valves (SCVs): two | Number of mid selective control valves (SCVs): two | Joystick SCV control: Mechanical | Remote control valves available : 2
- 18.4 gpm (70 L/min)
- Rear category (SAE designation): Category 2; convertible to 1 | draft control load sense type: Mechanical or electrohydraulic | Drawbar category: Category 2
- Working: Halogen | Type of bulb in headlight (Halogen, Zenon, LED): Halogen
- Rear power take-off: 1.375 in (34.9 mm) | Wheel tread range - MFWD 52.8-75.0 in (1340-1904 mm)
- with brakes - MFWD: 12.8 ft (3.9 m) / without brakes: MFWD: 15.4 ft (4.7 m)
- 92.5 in. (2350 mm)
- 157.3 in. (3996 mm)
- Maximum behind lift points: 5150 lb (2336 kg)
- Maximum vertical load: Road/field use (250-mm extended): 3197 lb (1450 kg) / Field use (350-mm extended): 2646 lb ( 1200 kg) / Field use (400-mm extended): 2646 lb (1200 kg)
- Open: 37.2 U.S. gal. (140.8 L) / Cab: 140.8 L | Diesel exhaust fluid (DEF) tank: 3.17 U.S. gal. (12.0 L)
- OOS: 9947 lb (4520 kg) / Cab: 10364 lb (4710 kg)
- Sensing type: Lower Link | Rollover protective structure, OOS: Rigid - foldable - telescopic / Foldable, 2-post / Platform - flat/straddle / Flat / Gearshift location - console/floor / Floor
- Mechanical | Display: Automotive-style light-emitting diode (LED) instrument cluster