Specifications

• 2018 John Deere 635FD Base
• Year2018
• ManufacturerJohn Deere
• Model Name635FD
• Trim NameBase
• Generic Type (Primary)General
• Operational
• Operating SpeedKnife: 490 cycles/min (1,040 spm) | Pickup reel: 6-70 rpm | Draper belts: Side belts: variable up to 228 m/min (748 fpm) | Center belts: 211 m/min (692 fpm) | Feed drum: 234 rpm
• DimensionsPickup reel Diameter: 1,067 mm (42 in.) | Feed drum Diameter: 414 mm (16 in.) | Feed drum fingers Diameter: Heavy-duty round with breakaway notch and retainer 16 mm (0.625 in.) | Finger reach: 152 mm 6 in.
• Cutterbar Length10.67 m (35 ft)
• Cutterbar TiltBase Hydraulic, 9 degrees max.
• WidthDraper belts: Side belts 1,016mm (40 in.) | Center belts: 1,397 mm (55 in.)
• HeightClean: Cleats 25.4 mm (1 in.)
• Lift CylindersReel; range 185 mm (7.3 in.) | Total range 251 mm (9.9 in.) | fore and aft: range 359 mm (14.1 in.) | Total range 616 mm (24.3 in.)
• Platform Height11.4 m (37.4 ft)
• Depth, MaximumOverall operating With dividers: 2.74 m (9.0 ft)
• Transport Widthfield position: 11.8 m (38.7 ft)
• Weights
• Weightpickup reel aprox: 3,350 kg (7,385 lb)
• FeaturesKnife drive: Dual knife base | Pickup reel Number of slats: six bat poly base | Fingers: Nylon | Height control: Hydraulic | Speed control: Hydraulic | Reel resume: Base | Reel reverse: Base | Draper belts Speed control: Hydraulic from cab (side belts only) | Center belt reverse: Base | Number of fingers: 20 | Auger finger platform: Dual chevron, retracting | Drum/auger reverse: Base | Center clean out door: Base | Header height sensing Type: Electro-hydraulic base
• Cutterbar TypeStraight-line knife drive system