American Implement

Specifications

• 2018 John Deere 8370R Base
• Year2018
• ManufacturerJohn Deere
• Model Name8370R
• Trim NameBase
• Generic Type (Primary)Row Crop
• Engine Powerat 2100 rpm (97/68EC): 370 hp (272 kW) | Max at 1900 rpm (97/68EC): 407 hp (299 kW)
• Engine ManufacturerJohn Deere PowerTech™ PSS 9.0 L
• Rated Engine Speed2,100 rpm
• Engine TypeDiesel
• Cylinder Linersin-line, 6, wet-sleeve with 4 valve-in-head
• AspirationDual series turbocharger with fixed geometry first stage, variable geometry second stage; air-to-air aftercooling and cooled exhaust gas recirculation
• Air FilterDual-stage with engine cooling fan aspiration
• Displacement549 cu. in. (9.0 L)
• Compression Ratio16.0:1
• LubricationFull-pressure, full-flow filtration with bypass
• Oil FilterReplaceable cartridge-style oil filter
• Bore4.66 in. (118 mm)
• Stroke5.35 in. (136 mm)
• Fuel SystemTwo-stage with water separator and serviceindicator light | Filter, primary: 10 micron spin-on element with water indication sensor and drain | Filter, secondary: 2 micron spin-on element
• Fuel TypeElectronically controlled, high-pressure commonrail with electric fuel transfer pump (self priming) | Required: Ultralow sulfur diesel (B20 diesel compatible)
• PTO
• Engine TorquePTO: 39%
• PTO Power, Rated Engine Speedat 2,100 rpm: 313 hp (233 kW) | 1 3 /4 in. (44 mm) 20-spline, 1,000 rpm | 1,000 PTO rpm at 2,003 engine rpm, 1,000 ECO PTO rpm at 1,596 engine rpm, and 540 PTO rpm at 1,817 engine rpm for PST, 1,000 PTO rpm at 2,000 engine rpm, 1,000 ECO PTO at 1,594 engine rpm, and 540 PTO rpm at 1,814 engine rpm for IVT
• PTO TypeBulge: 10%
• Drivetrain
• TransmissionJohn Deere AutoPowr™ IVT™ 0.030-26 mph (0.050-42 km/h): 42 km/h at 1,360 ECO erpm with group 49 tires, 42 km/h at 1,434 ECO erpm with group 48 tires, 42 km/h at 1,511 ECO rpm with group 47 tires
• Hydraulics
• Hydraulic TypeClosed-center, pressure and flow compensated | Selective control valves (SCVs) with 1 /2 in. ISO couplers: 4
• Hydraulic PumpMain, axial piston (displacement): 85cc
• Maximum Pressure2,958 (+/- 4.4) psi (20,400 +/- 300 kPa)
• Hydraulic FlowRated flow, 85 cc pump: 60 U.S. gpm (227.1 L/min) | Rated flow, Dual Pump 85cc plus 35cc: 85 U.S. gpm (321 L/min)
• Electric
• Alternator/Battery:200 amps/12 Volt
• ElectricalTwo batteries in parallel | Total cold-cranking amps: 1850 (2-925CCA grp 31 batteries)
• Wheels & Tires
• WheelsGroup 47/48/49 tires Available as Singles/Duals/Triples. See dealer for tire size selection and limitations
• Axle Countrear final drives: Inboard planetary three pinion | Rear: Rack-and-Pinion axle | Front: Independent Link Suspension (ILS), tread range 60 to 144 in. (1524 to 3657 mm) | Independent Link Suspension (ILS), suspension trave: Plus or minus 4.92 in. (125mm) at tread centerline for 5 step ratio axle at 1880mm tread |Front axle, 1500 Series MFWD: Full-locking electrohydraulic (actuated at same time as rear diff-lock) | Front axle, ILS: Full-locking electrohydraulic (actuated at same time as rear diff-lock) | Rear axle: Full-locking electrohydraulic
• Dimensions
• WheelbaseMFWD/ILS: 121.3 in. (3080 mm) / 120.1 in. (3050 mm) | MFWD/ILS: axle clearance 27 in. (686 mm) / 23.2 in. (590 mm)
• SteeringHydraulic power
• Capacities
• Fuel Capacity170.4 gal (645L) with Group 47/48 tires | 181.2 gal (686L ) with Group 49 tires
• Hitch Lift Capacity3 Point rear: Lower draft shaft bending bar, electrohydraulic sensing |Category 4N/3 with Quik-Coupler - 120mm Axle Required: 20,000 lb. (9,702 kg)) - Maximum Lift Capacity 26,307 lb (11,933 kg) | 3 Point Front: 11,464 lb (5,200 kg)
• Oil capacityDEF: 6 U.S. gal (23L)
• Weights
• WeightILS: 33,091 lb (15,009 kg)
• FeaturesAutoTrac™ Ready | ServiceADVISOR™ Remote: Requires activated JDLink service | CommandCenter™ Display video with 4600 Processor: Video capable; four video inputs (Tyco Connector PN 776536-1) for camera with PAL or NTSC signal