Back

2019 John Deere 2032R

2019 JOHN DEERE 2032R CUT TRACTOR; HYDROSTATIC TRANSMISSION; MFWD; OPEN STATION; NEW SEAT; ROPS; 2 SCVS; CAT1 IMATCH HITCH; 14-17.5 R4 REAR SINGLES (GOOD); 23X8.50-14 R4 FRONT SINGLES (GOOD); W/ JOHN DEERE 220R LOADER W/ BUCKET. (SOLD TOGETHER). For more information contact Tony Butts with American Implement at 785/269/7350 or tonybutts@americanimplement.com
MoreLess
Limited Time Offer!

Selling Price -$25,000.00
No Images Available

Selling Price -

$25,000.00

HD Certified Pre-Owned
  • Front Axle:MFWD
  • Factory Installed Loader with Bucket
  • iMatch Quick Hitch Category 1
  • 14-17.5 (4PR, R4 Industrial, 1 Position) Bias Ply
  • 23X8.50-14 (4PR, R4 Industrial, 1 Position) Bias Ply
  • 2019
  • John Deere
  • 2032R
  • Base
  • Compact
  • Yanmar 3TNV88C-NJT
  • Direct Injection
  • Rated: 23.3 kW (31.2 hp)
  • 2500 rpm
  • Cylinders: 3 / 1.642 L (3 / 100.2 cu in.)
  • Direct Injection
  • Natural
  • 88 mm (3.46 in.)
  • 90 mm (3.54 in.)
  • 19.1:1
  • Pressurized
  • Water pump
  • Dual element
  • at rated speed: 86 Nm (63.4 lb-ft)
  • Type: Spur Gear
  • 5.8 L/hr (1.5 U.S. gal./hr)
  • Direct injection
  • power: 18 kW (24.2 hp)
  • Rear - 540 rpm | Mid - 2000 rpm
  • Standard transmission; forward/reverse: Hydrostatic | Final drive: Bull Gear | Brakes: Wet disc |
  • Open center
  • rated output: Steering 15 L/min (4 gpm) | Implement: 20.2 L/min (5.3 gpm), 35.2 L/min (9.3 gpm)
  • Power steering
  • Gear
  • Operating: 172.37 bar (2500 psi)
  • 500 CCA
  • 12-V: 85 amp
  • Size: 1.4 kW (1.9 hp)
  • R1 Ag 12.4-16 | R3 Turf 14-17.5 | R4 Industrial 14-17.5 | R3 Turf Radial 300/70 R20
  • R1 Ag 7.00-12 | R3 Turf 23x8.50-14 | R4 Industrial 23x8.50-14 | R3 Turf Radial 200/60 R15
  • 880 kg (1940 lb)
  • 1089 kg (2400 lb)
  • Turning radius with brakes: 2.75 m (9.02 ft) | Turning radius without brakes: 3 m 89.84 ft)
  • 172.5 cm (67.9 in.)
  • 32 L (8.5 U.S. gal.)
  • 3 Point Category 1 | 24-in. behind link arms: 615 kg (1356 lb)
  • Crankcase with filter: 2.7 L (2.9 qt)
  • Approximate shipping (open-station; cab): 1105 kg (2436 lb)
  • Emissions compliance: Final Tier 4 | Number of cylinders: Three | Cylinder liners: Cast-in-block | Draft control sensing: Position control | Remote control valves available: Up to three | PTO Control: Independent | Clutch: Independent | Brake (for mid and rear PTO): Wet disc | Rollover protective structure: Type Foldable ASABE S478 | Platform - flat/straddle: Flat | Gear shift location - console/floor: Left-hand side | Toolbox | Tilt steering wheel
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $25,000.00
  • Oakley
  • Pre-Owned
  • 99655/99658
  • 2019
  • John Deere
  • 2032R
  • 1LV2032RLJJ105915
  • 32
  • 58
  • Standard transmission; forward/reverse: Hydrostatic | Final drive: Bull Gear | Brakes: Wet disc |
  • Direct injection
  • Available

Recommendations

Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.